引用本文
  •    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 155次   下载 86 本文二维码信息
码上扫一扫!
基于T-S模糊模型的非线性分布参数 系统极点配置P-sD控制
党爱然,栾秀春,孙贺涛,王俊玲,周杰,杨志达
0
(哈尔滨工程大学黑龙江省核动力装置性能与设备重点实验室,哈尔滨 150001;哈尔滨工程大学核安全与先进核能技术工信部重点实验室,哈尔滨 150001;哈尔滨工程大学核安全与仿真技术国防重点学科实验室,哈尔滨 150001)
摘要:
采用Lyapunov直接法讨论分布参数系统的稳定性,建立分布参数系统的Lyapunov函数。为保证分布参数系统稳定,应使Lyapunov函数对时间的微分小于0。由于分布参数系统中存在空间一次微分项与二次微分项,Lyapunov函数对时间的微分中将出现常数项与积分项,针对常数项,引入空间一次微分项来抵消;针对积分项,引入对应的状态反馈来使系统稳定。利用边界条件量化Lyapunov函数对时间的微分中的各项,从而设计控制器,这是一种新的设计P-sD状态控制的方式。其中状态反馈的部分采用极点配置的方法来设计,当分布参数系统中出现状态变量的非线性函数时,采用T-S模糊模型表达,可以通过状态变量的线性组合精确描述非线性项,以便极点配置设计状态反馈。针对两个非线性分布参数数学模型进行仿真,结果证明设计的P-sD状态控制器可以使分布参数系统稳定,并达到期望的效果。
关键词:  分布参数系统  Lyapunov稳定性  T-S模糊模型  P-sD状态控制
DOI:
基金项目:
Pole Assignment P-sD Control for Nonlinear Distributed Parameter Systems Based on T-S Fuzzy Model
DANG Ai-ran,LUAN Xiu-chun,SUN He-tao,WANG Jun-ling,ZHOU Jie,YANG Zhi-da
(Heilongjiang Provincial Key Laboratory of Nuclear Power System & Equipment, Harbin Engineering University, Harbin 150001, China; Key Laboratory of Nuclear Safety and Advanced Nuclear Energy Technology, Ministry of Industry and Information Technology, Harbin Engineering University, Harbin 150001, China; Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin 150001, China)
Abstract:
The Lyapunov direct method is used to prove the stability of the distributed parameter system, and the Lyapunov function of distributed parameter system is established. In order to ensure the stability of the distributed parameter system, the time differential of Lyapunov function should be less than 0. Because of the space differential term and the second differential term in the distributed parameter system, the constant term and the integral term appears in the time differential of Lyapunov function. For the constant term, a space differential term is introduced to offset; for the integral term, a suitable state feedback is introduced to make the system stable. By using the boundary condition to quantify the constant term in the differential of Lyapunov function to time and canceling it, the state feedback of pole assignment design is more instructive, and this is a new way of designing P-sD state control. The part of state feedback is designed by the method of pole assignment. When the nonlinear function of state variable appears in the distributed parameter system, it is expressed by the T-S fuzzy model, the nonlinear term can be accurately described by linear combination of state variables, so as to design state feedback of pole assignment. The simulation results of two nonlinear distributed parameter models show that the designed P-sD state controller can make the distributed parameter system stable and achieve the desired effect.
Key words:  Distributed parameter system  Lyapunov stability  T-S fuzzy model  P-sD state control

用微信扫一扫

用微信扫一扫